Chapter 4 Operations; 41 General Operations; 411 Reading Measured Data; 4111 Summary Search - ADTEK AEM-DRB Operation Manual

Chapter 4 Operations

4.1 General Operations
4.1.1 Reading Measured Data
4.1.1.1 Summary Search
In the main screen, press the UP or DOWN key to switch the following comprehensive
display measurement pages.
• Summary-1: Specify loop of summary the measurement parameters, including VLLavg,
Iavg, Psum, Freq.
• Summary-2: Specify loop of summary the measurement parameters, including Psum,
Qsum, Ssum, PFavg.
• Summary-3: Specify loop of summary the measurement parameters, including VLLavg,
Iavg, Psum, PFavg.
• Summary-4: Specify loop of summary the measurement parameters, including VLLavg,
Iavg, Psum, Freq.
• Summary-5: Specify loop of summary the measurement parameters, including Psum,
Qsum, Ssum, PFavg.
• Summary-6: Specify loop of summary the measurement parameters, including VLLavg,
Iavg, Psum, PFavg.
• Summary-P: Specify loop of summary the measurement parameters, the parameters to
be displayed on this page can be set by yourself.
4.1.1.2 Metering Search
Press ENTER key enter the system menu and select the Metering then press ENTER key
again to enter.
Press LEFT key return to previous page.
• First select the loop you want to search, including main loop A, main loop B, loop A 1-3,
loop A 4-6, loop A 7-9, loop A 10-12, loop B 1-3, loop B 4-6, loop B 7-9, loop B 10-12.
• V L-N Measurement: Parameter of phase voltage measured by the power meter, including
V1, V2, V3, Vavg.
• V L-L Measurement: Parameter of line voltage measured by the power meter, including
U12, U23, U31, Uavg.
• Current Measurement: Parameter of current measured by the power meter, including I1,
I2, I3, Iavg, IN.
• Frequency Measurement
• Power Factor Measurement: Parameter of power factor measured by the power meter,
including PF1, PF2, PF3, PFavg.
• Disp.PF Measurement: Parameter of power factor measured by the power meter,
17