Casablanca Bel Air Owner's Manual page 7

IMPORTANT! To avoid possible damage to the
Halogen bulb holder the fan must be placed on
the styrofoam packaging from the box. After
removing the top cover from the upper half of
the styrofoam, take the packaging from the box
and put it on the floor. Place the fan in the
recessed circle that the top cover was in.
Step 3. Locate the three
tabs on the top of the fan
motor assembly.
Remove the three top
cover retaining screws and
set aside for Step 6.
Step 4. Locate the top
cover and note the three
mounting tabs on the top.
Step 5. Lower the top
cover over the fan downrod
with the top cover mount-
ing tabs lined up with the
tabs on the fan motor as-
sembly.
Step 6. Once the tabs are
aligned, attach the top
cover to the motor using
the three top cover retain-
ing screws removed in
Step 3. Hand tighten en-
suring that all screws are
engaged.
Test that the cover is on
securely before continuing
with the installation.
INSTALLING THE FAN BODY TOP COVER
NOTE: Make a note of the
Fan Serial Number and
Model Type before install-
ing the top cover.
TOP COVER
MOUNTING
TABS
™
B A
EL IR
TOP COVER
RETAINING
SCREWS
FAN
MOTOR
ASSEMBLY
TOP
COVER
TOP COVER
RETAINING
SCREWS
7