Realigning The Pattern - Brother NV1250D Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
UTILITY STITCHES
Deleting a stored pattern
Stored pattern in the pockets can be deleted.
a Press (Recall key).
Select the pocket where the pattern you wish
b
to delete is stored.
indicates pockets where patterns are
already stored.
The selected pocket is shown in reverse
highlighting, and the stored pattern is
displayed.
Check the contents, then press
c
The confirmation message is displayed.
Press .
d
The stored pattern and the pocket are
deleted.
136

Realigning the pattern

The pattern may not be sewn correctly, depending on
the type of fabric being sewn or the sewing speed. If
this occurs, adjust the pattern while sewing on a
piece of scrap fabric that is the same as that used for
your project.
a Attach monogramming foot "N".
• For details, refer to "Replacing the presser
foot" (page 44).
b Press
panel, and select
.
The screen containing the various decorative
stitches appears.
c Select
The pattern alignment stitch is selected.
(Utility stitch key) on the operation
(Decorative stitch).
.