Saving Stitch Settings - Brother NV1250D Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Example: Bus

Saving stitch settings

This machine is preset with the default settings for the
stitch width (zigzag width), stitch length, thread
tension, programmed thread cutting, and automatic
reverse/reinforcement stitching for each stitch.
However, if you wish to save specific settings for a
stitch so that they can be used later, press
changing the settings to save the new settings with
the selected stitch.
This feature can be used only with utility stitches.
To use a stitch length of 2.0 mm for the
straight stitch
a Select a straight stitch.
b Press .
Memo
The default stitch length is 2.5 mm.
c Set the stitch length to 2.0 mm.
d Press .
• To reset the selected stitch pattern to its
default settings, press
.
The confirmation message is displayed.
after
, and then press
Selecting Stitching 79
3