Winding/Installing The Bobbin; Bobbin Precautions; Winding The Bobbin - Brother NV1250D Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Winding/Installing the Bobbin

This section describes how to wind the thread onto the bobbin, and then insert the bobbin thread.

Bobbin precautions

Be sure to observe the following precautions
concerning the bobbin.
CAUTION
Only use the Bobbin (part code: SA156,
SFB) designed specifically for this sewing
machine. Use of any other bobbin may
result in injuries or damage to the
machine.
The included bobbin was designed
specifically for this sewing machine.
If bobbins from other models are used,
the machine will not operate correctly.
Use only the included bobbin or bobbins
of the same type (part code: SA156, SFB).
11.5 mm
(7/16 inch)
Actual size
Other model
This model

Winding the bobbin

Wind the thread around the bobbin to prepare the
bobbin thread.
Turn on the sewing machine.
a
b Open the top cover.
c Place the bobbin on the bobbin winder shaft so
that the spring on the shaft fits into the notch
in the bobbin
.
Press down on the bobbin until it snaps into
place.
a Notch
b Bobbin winder shaft spring
d Slide the bobbin winder in the direction of the
arrow until it snaps into place.
• (Start/stop button) lights up in orange.

Winding/Installing the Bobbin 25

1
2
1