Attaching The Embroidery Foot - Brother NV1250D Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Attaching the Embroidery Foot

This section describes how to attach the embroidery foot.
Attaching the embroidery foot
Attach the embroidery foot when embroidering. Have
the included embroidery foot "Q" and a screwdriver
ready.
a Embroidery foot bar
b Caught by the presser foot holder screw
CAUTION
Always use the embroidery foot "Q"
when embroidering. If the wrong presser
foot is used, the needle may hit the
presser foot and break or bend.
a Press
twice to raise the needle.
a Needle position button
The needle goes up.
Turn off the sewing machine.
b
1
2
(Needle position button) once or
1
CAUTION
Before replacing the presser foot, be sure
to turn off the sewing machine, otherwise
injuries may occur if
button) is accidentally pressed and the
machine starts sewing.
c Raise the presser foot lever.
a Presser foot lever
The presser foot is raised.
• At the time of purchase, the presser foot lever
is up.
d Press and hold the black button on the back of
the presser foot holder to detach the presser
foot.
a
b
a Black button
b Presser foot holder
Attaching the Embroidery Foot 147
(Start/stop
a
4