Using The Twin Needle - Brother NV1250D Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
GETTING READY

Using the twin needle

With the twin needle, you can sew two parallel lines
of the same stitch with two different threads. Both
upper threads should have the same thickness and
quality. Be sure to use the twin needle, the extra
spool pin and the spool cap.
For details on the stitches that can be sewn with the
twin needle, refer to "Stitch Setting Chart" (page 70).
CAUTION
Only use the twin needle (part code:
X59296-121). Use of any other needle
may bend the needle or damage the
machine.
Never use bent needles. Bent needles can
easily break, possibly resulting in injuries.
a Install the twin needle.
• For details on installing a needle, refer to
"Replacing the needle" (page 42).
b Thread the upper thread for the left needle
eye.
• For details, refer to steps
"Threading the upper thread" (page 31).
c Manually thread the left needle with the upper
thread.
Pass the thread through the eye of the needle
from the front.
• The needle threader cannot be used with the
twin needle. If the needle threader is used
with the twin needle, the sewing machine
may be damaged.
36
d
e
f
a k
through of
Insert the extra spool pin onto the bobbin
winder shaft.
Insert the extra spool pin so that it is
perpendicular to the bobbin winder shaft.
1
a Bobbin winder shaft
Swing down the spool pin so that it is
horizontal.
Place the upper thread spool for the needle on
the right side onto the extra spool pin, and
then secure it with the spool cap.
The thread should unroll from the top front of
the spool.
1 2
a Spool cap
b Spool