Table of Contents
Advertisement
5
Press
(OK key).
The contents of the selected pocket are
displayed.
Check the contents, and then press
6
key).
To select a different pocket, press
key).
The initial stitch screen appears again, and
the pattern from the selected pocket is
recalled.
Realigning the pattern
The pattern may not be sewn correctly, depending
on the type of fabric being sewn or the sewing speed.
If this occurs, adjust the pattern while sewing on a
(OK
piece of scrap fabric that is the same as that used for
your project.
Attach monogramming foot "N".
1
(back
• For details, refer to "Replacing the presser
foot" (page 37).
Press
2
operation panel.
The screen containing the various types of
stitches appears.
3
Press
is selected, and then select
The pattern alignment stitch is selected.
4
Start sewing.
The pattern for making the adjustment is
sewn.
The sewing machine stops after it has
finished sewing the pattern.
Sewing the Various Built-In Decorative Patterns
(stitch selection key) in the
,
,
and
(arrow keys) until
3
.
121
Advertisement
Table of Contents
