Brother NV1250D Operation Manual page 39

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
g Thread the upper thread in the same way that
the upper thread for the left side was threaded.
a Thread guide cover
• For details, refer to steps
"Threading the upper thread" (page 32).
h Without passing the thread through the needle
bar thread guide, manually thread the right
needle.
Pass the thread through the eye of the needle
from the front.
• The needle threader cannot be used with the
twin needle. If the needle threader is used
with the twin needle, the sewing machine
may be damaged.
i Attach zigzag foot "J".
• For details on changing the presser foot, refer
to "Replacing the Presser Foot" (page 44).
CAUTION
When using the twin needle, be sure to
attach zigzag foot "J". If bunched stitches
occur, use presser foot "N" or attach
stabilizer material.
1
h j
through of
j Turn on the sewing machine and select a stitch.
• For stitch selection see "Selecting stitching"
(page 51).
• See "Stitch Setting Chart" (page 70) for
stitches that use a twin needle.
Note
When using the pintuck foot (sold
separately) to sew straight pintucks with the
twin needle, select the stitch with the center
needle position.
CAUTION
When using the twin needle, be sure to
select an appropriate stitch, otherwise the
needle may break or the machine may be
damaged.
k Press .
The screen for setting the twin needle
appears.
l Press .
displays in reverse highlight.
• If pressed again, it returns to
The twin needle can now be used.
.
Upper Threading 37
1