Retrieving A Pattern; Realigning The Pattern - Brother SB3150 Operation Manual

Sewing the Various Built-in Decorative Patterns

Retrieving a pattern

a
Press once or twice until a list of saved patterns
like the one shown below is displayed.
b
Select the desired saved pattern using
.
→ The selected pocket is shown in reverse highlighting,
and the stored pattern is displayed.
Memo
• Use to scroll the selected pattern
horizontally to confirm the whole pattern.
c
Check the contents, and then press

Realigning the pattern

The pattern may not be sewn correctly, depending on the type
of fabric being sewn or the sewing speed. If this occurs, adjust
the pattern while sewing on a piece of scrap fabric that is the
same as what is used for your project.
The pattern used for making adjustments differs depending on
the sewing machine model.
For models equipped with vertical and horizontal fine
adjustment settings: (No. 36 of
For models equipped with only vertical fine adjustment
settings: (No. 31 of )
D-10
a
b
c
or
d
.
)
e
Attach monogramming foot "N".
Select or .
Start sewing.
→ The sewing machine stops after it has finished sewing
the pattern.
Check the sewn pattern.
If the part of the pattern indicated in the illustration is
sewn uniformly, the pattern is correctly aligned.
If the pattern appears as shown below, the stitching is
misaligned in the vertical direction.
(For models equipped with horizontal fine adjustment
settings)
If the pattern appears as shown below, the stitching is
misaligned in the horizontal direction.
If the pattern is not sewn correctly, follow the steps
below to adjust the sewing.
Select (Fine adjustment – vertical) in the settings
screen.