Brother NV1250D Operation Manual page 184

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
EMBROIDERY
e Insert the USB media into the USB port on the
machine.
a USB port
(for a USB flash drive (USB flash memory))
b USB media
f Press .
The stored patterns are displayed.
Note
If the message "Reduce the number of
patterns." appears, the USB media may
contain either more than 200 embroidery
patterns or the embroidery designs may
contain too many colors (although there may
be no more than 200 patterns).
In this case, unplug the USB media from the
machine, plug it back into the computer,
and then delete a few designs at a time from
the USB media.
Close the error message on the machine,
and then repeat procedures starting from
e
step .
Memo
The pattern file names appear in
alphabetical order.
Only the names of .dst files are displayed.
182
g Select the pattern you wish to recall.
Switch screens using
and (Next page key).
a Number of the currently displayed page from the
total number of pages
•When /
patterns moves forward or backward in
increments of 10 designs.
The selected pattern is shown in reverse
highlighting.
h Press .
The stored pattern is recalled.
The embroidery screen appears, and you
can embroider the recalled pattern.
i Adjust the pattern as desired, and then begin
embroidering.
(Previous page key)
a
is pressed, the display of