Device Custom Settings - Canon imageRUNNER 105 Function Manual

Device Custom Settings

The machine's custom settings can be edited with the Remote UI.
Follow the procedure below to customize the machine's settings from the Remote
UI.
2
IMPORTANT
Functions that can be set vary depending on the machine.
NOTE
•
The custom settings that are available using the Remote UI are part of the settings
available from the control panel of the machine. For instructions on using the control
panel to specify the machine's custom settings, see Chapter 4, "System Manager
Settings," in the Reference Guide. If you are using iR6000/5000, see Chapter 6, "Setting
and Adjusting Common Settings to Suit Your Needs," in the User's Guide.
•
For more information on the machine's custom settings, see the other manuals relating to
the function that needs to be set.
•
Of the settings available by pressing
panel, the following settings are accessed from other menus within the Remote UI.
- Mail Box Settings:
- Address Book Settings:
- System Settings:
2-126

Device Custom Settings

- System Manager Settings:
- Register LDAP Server:
- Forwarding Settings:
- Dept. ID Management:
(Additional Functions) on the machine's control
Specify settings by clicking [Mail Box]. (See "Managing
Inboxes," on p. 2-26.)
Specify settings by clicking [Address] © [Address Book].
(See "Managing the Address Book," on p. 2-60.)
Specify settings by clicking [Add. Func.] ©
[System]. (See "Customizing System Settings,"
on p. 2-81.)
Specify settings by clicking [Add. Func.] © [Store
LDAP Server]. (See "Specifying LDAP Server
Settings," on p. 2-90.)
Specify settings by clicking [Add. Func.] ©
[Forwarding Settings]. (See "Specifying
Forwarding Settings," on p. 2-94.)
Specify settings by clicking [Add. Func.] ©
[Department ID Management]. (See "Managing
Department IDs," on p. 2-101.)