Windows Nt 4.0 - Canon imageCLASS 2300 Network Manual

Windows NT 4.0

1
Check that [Microsoft Windows TCP/IP Printing] is installed.
❑
Right click the [Network Neighborhood] icon on the screen ➞ click [Properties].
❑
Click the [Services] tab to display the [Services] sheet.
If [Microsoft TCP/IP Printing] is not included in [Network Services], proceed to
step 2; otherwise skip to step 3.
2
If [Microsoft TCP/IP Printing] is not installed, install it.
❑
Click [Add].
❑
Select [Microsoft TCP/IP Printing] from [Network Services] ➞ click [OK].
❑
When asked to insert the Windows NT setup disk, insert the disk, and then
continue.
After the files have been copied, the [Network] dialog box opens.
❑
Click [OK].
❑
Click [Restart] to restart Windows NT.
3
Install the printer driver. (See Chapter 1, "Before You Start
Using This Machine," in the PCL Driver Guide.)
When the dialog box for selecting the printer management appears, select [My
Computer]. Do not select [Network printer server].
The port selection can be changed after installation. You can select any port,
such as [LPT1].
Setting Up a Computer for Printing
2
2-29