Intermatic GRASSLIN talento smart Operating Instructions Manual page 57

1 . Press the button:
Menu
2 . Select and confirm with
Program
For clarification of the following action steps, see flow chart.
3 . Select and confirm with
New
4 . In step
With Date?
confirm with (also refer to Seite 52) .
OK
5 . Select and confirm with
Impulse
6 . Enter hour and minute of the start time (+/-) and confirm each with
NOTE: The data for sunrise and sunset should be considered in connection with the astro-variant .
The choice of these parameters is between 11 p .m . and midnight .
7 . Enter hour(s), minute(s) and second(s) of the impulse duration (+/-) and confirm each with
8 . Set the weekday(s) (+/-) to which the switching time should apply, and confirm with
NOTE: The weekdays 1-5, 6-7 and 1-7 are preset . Individual weekdays can be set (+/-) under
"Select days" .
9 . Select channel (+/-) for which the impulse should be set, and confirm with
(1)
NOTE: The plus sign stands for active, the minus sign for an inactive channel .
10 . Select to create an additional switching command or select
YES
priority .
(2)
The channel selection is only available with 2-channel timers
(1)
The choice of priority is only possible in advanced mode; refer to „Defining prioritisation of programs"
(2)
auf Seite 61 .
OK.
.
OK
,specify whether the device is to be activated on a certain date and - if yes -
.
OK
.
OK
.
OK
.
OK
to determine the possible
NO
EN
.
OK
57