Automatic/ Manual Mode; Override Mode - Intermatic GRASSLIN talento smart Operating Instructions Manual

Automatic/ Manual Mode

Set the operating mode in which the device is to be operated via the left function key:
EN
The following settings are possible:
• Permanently ON (FIX)
• Permanently OFF (FIX)
• Override mode (OVR)
• Automatic mode
To adjust the channel state for channel 1 or channel 2, press the appropriate left function button until the
desired mode is selected .

OVERRIDE MODE

The override mode (temporarily overrides a running program) allows the user to terminate the running
program early or to start a later start-up program prematurely . This depends on the current channel
status. The override function is valid only for the current program and is retained until the next program
change . Then the device will return to automatic mode .
78