Using Wildcards - Intermatic GRASSLIN talento smart Operating Instructions Manual

4 . In step
SELECT FCT
−
ON
Select the times at which a channel should be switched on 
−
OFF
Select the times at which a channel should be switched off 
−
Pulse
Select the settings for pulse programming 
−
Cycle
Select the settings for cycle programming 
−
Random ON
Select the settings for random programming ON 
−
Random OFF
Select the settings for random programming OFF 
5 . Select the desired function and confirm with
The number of available switching command memory spaces appears (CXXX).
The available memory spaces depend on the variant of the device .

USING WILDCARDS

You can use wildcards when entering the date . This allows you to program recurring switching times that
are always to be carried out, for example, always the first of the month. In place of annual, monthly or
daily numbers, choose the wildcards **** for the year and ** for the month and day instead .
Below you see how date entries appear and how you can use wildcards:
•
2016.03.13 - 2016.03.13
The switching command is executed only on 13 March 2016.
•
2016.03.13 - 2016.03.20
The switching command is executed between 13 March 2016 and 20 March 2016.
•
2016.**.13 - 2016.**.13
The switching command is executed the 13th of every month in 2016.
•
****.**.01 - ****.**.01
The switching command is always executed annually on the first day of a month.
The wildcards for the year can be found when you scroll through the current year number in the date
entry program . The wildcards for the month can be found between December and January .
(FCT = Function), specify the type of switching command:
.
OK
.
A
.
B
.
C
.
D
.
E
.
F
EN
53