Switching State Display - Intermatic GRASSLIN talento smart Operating Instructions Manual

SWITCHING STATE DISPLAY

As an example for channel 1, the switching status display appears as follows:
Channel Fix OFF
There is no display via the icon for the channel in automatic mode .
From the automatic mode, you can make the following settings using the corresponding function key for
channel 1 or channel 2, taking into account the starting point:
• ON
– Press 1x = Override OFF
– Press 2x = Channel Fix OFF
– Press 3x = Channel Fix ON
• OFF
– Press 1x = Override ON
– Press 2x = Channel Fix ON
– Press 3x = Channel Fix OFF
Channel Fix ON Override ON
EN
79