Page of 2

Intermatic ST01 Series Easy Setting Manual

Self-adjusting wall switch timer.
Hide thumbs
   
MODEL ST01 Series
This Easy-Set Instruction Sheet may be helpful in setting up common timer programs.
Refer to the Installation and User Instructions Sheet for more information.
To Clear the Timer
1.
Press and hold down the ON/OFF button.
2.
Using a paper clip or pen, press and release
the RESET button, which is to the lower right of
the + button.
3.
Continue holding ON/OFF until you see INIT on
the screen.
4.
Release ON/OFF.
5.
Wait until you see 12:00 am in MANual mode.
Setting the Time and Date
1.
Press MODE to display SETUP.
2.
Press ON/OFF.
3.
Press + or – to set your hour for the current
time of day.
4.
Press ON/OFF.
5.
Press + or – to set your minutes for the current
time of day.
6.
Press ON/OFF.
7.
Press + to advance the year if needed.
8.
Press ON/OFF.
9.
Press + or – to change the month.
10.
Press ON/OFF.
11.
Press + or – to change the date.
12.
Press ON/OFF. Make sure it's the correct day of
the week. If not, go back and check the year.
13.
Press ON/OFF to choose DST (Daylight Saving
Time)
Press + to select Man if you do not observe
DST, or
Press + again to select Auto to automatically
set for DST.
14.
Press ON/OFF to choose zone.
15.
Press + to select your zone. (Refer to map in
the Install Sheet for proper zone).
Self-Adjusting Wall Switch Timer
Easy-Set Guide
16.
17.
18.
Programming Dusk ON/Dawn OFF
1.
2.
3.
4.
5.
6.
7.
8.
9.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Press ON/OFF to review Dawn time.
Press ON/OFF twice to review Dusk time.
Press ON/OFF twice to save.
Press MODE to display PGM.
Press ON/OFF three times to choose DUSK.
Press ON/OFF to choose the days you need,
then press + to change days from ALL, M-F,
WeeKenD, or individual day.
Press ON/OFF to SAVE your work.
Press + to go to Program 2.
Press ON/OFF twice to display DAWN.
Press ON/OFF to choose the days you need,
then press + to change days from ALL, M-F,
WeeKenD, or individual day.
Press ON/OFF to SAVE your work.
Press MODE to display AUTO.
Press MODE to display PGM.
Press ON/OFF three times to choose DUSK.
Press ON/OFF to choose the days you need,
then press + to change days from ALL, M-F,
WeeKenD, or individual day.
Press ON/OFF to SAVE your work.
Press + to go to Program 2.
Press ON/OFF twice to display DAWN.
Press + until you get to 12:00 pm.
Press ON/OFF.
Press + or – to set the hour of the OFF time.
Press ON/OFF.
(Continued on the back)

   Related Manuals for Intermatic ST01 Series

   Summary of Contents for Intermatic ST01 Series

  • Page 1: Programming Dusk On/fixed Time Off

    MODEL ST01 Series This Easy-Set Instruction Sheet may be helpful in setting up common timer programs. Refer to the Installation and User Instructions Sheet for more information. To Clear the Timer Press and hold down the ON/OFF button. Using a paper clip or pen, press and release the RESET button, which is to the lower right of the + button.

  • Page 2: Programming Fixed Time

    Press + or – to set the minutes of the OFF time. Press ON/OFF to choose the days you need, then press + to change days from ALL, M-F, WeeKenD, or individual day. Press ON/OFF to SAVE your work. Press MODE to display AUTO. Programming Fixed Time ON/Fixed Time OFF Press MODE to display PGM.

Comments to this Manuals

Symbols: 0
Latest comments:
  • Bob Kohne Jan 25, 2017 06:47:
    Like others before me, I too have tried numerous times to program this controller using these instructio​ns. The instructio​ns are either faulty or the unit itself is flawed. Had same problem with previous Intermatic wall timer. Will look for a different brand and suggest others do so as well to avoid the hours spent trying to get this timer to work.
  • Alasdair White Dec 13, 2016 12:33:
    I Have tried 5 times unsucessfu​ly to Set up my timer to a 4.30pm turn on and 11.30pm switch off 7days a week. I have followed instrictio​ns but i am missing something. Can you Send Step To Step Instructio​ns For These Daily Settings. Thank You. alasdair.w​hite@gmail​. com
  • TONY Nov 22, 2016 08:47:
    NEEDS MORE WORK IN EXPLAINING HOW TO PROGRAM ASTRO ON AND FIXED TIME OFF. i FINALLY GOT IT TO GO ON CORRECTLY BUT IT DIDN'T SHUT OFF AND THE LIGHT REMAINED ON ALL NIGHT.
  • roland Jul 31, 2016 09:01:
    Is there an easy way to set the on and off time ?
  • Peggy Brown Nov 05, 2015 07:45:
    What zone should I use for New Jersry