Cf_Delayctrl Command; Cf_Filtimer Command; Cf_Filh Command; Cf_Fdefault Command - Canon LV-7290 Command Specifications

LV-7290 / LV-7295 / LV-7390/ LV-8225 Expand Serial Command Functional Specifications

8.10.25 CF_DELAYCTRL Command

Command "CF_DELAYCTRL_%1"[CR]
"ON" --------------------------- Set Video delay control On
%1
"OFF" -------------------------- Set Video delay control Off
Set Video delay control.
Details The status set by this command is stored in EEPROM and its setting is effective
even after ALL is OFF. This command is available in normal Power ON status.
Acceptable
Response
Unacceptable

8.10.26 CF_FILTIMER Command

Command "CF_FILTIMER_%1"[CR]
"2000" -------------------- Set 2000 hours
"3000" -------------------- Set 3000 hours
"4000" -------------------- Set 4000 hours
%1
"OFF" ------------------- No warning display
"UP" --------------- The same operation as pressing Up key or Left key
"DN" --------------- The same operation as pressing Down key or Right key
Details Set timer of Filter replacement /clean-up warning display.
Acceptable
Response
Unacceptable

8.10.27 CF_FILH Command

Command "CF_FILH_%1"[CR]
%1 "RST" ---------------Reset Filter used time
Details Reset filter used time
Acceptable
Response
Unacceptable

8.10.28 CF_FDEFAULT Command

Command "CF_FDEFAULT_%1"[CR]
%1 "RST"
Set the value to Factory Default
Details
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
45