Setting Command Table; Other Command Table - Canon LV-7290 Command Specifications

LV-7290 / LV-7295 / LV-7390/ LV-8225 Expand Serial Command Functional Specifications

5.7 Setting Command Table

Execute command
CF_LANG_%1[CR]
CF_MENUPOSITION_%1[CR]
CF_INPUTSEARCH_%1[CR]
CF_AUTOSETUPPCADJ_%1[CR]
CF_AUTOSETUPKEYSTONE_%1[CR]
CF_AUTOSETUP_%1[CR]
CF_BACKGND_%1[CR]
CF_DISP_%1[CR]
CF_LOGO_%1_%2[CR]
CF_TERMINAL_%1[CR]
CF_P-MANE_%1[CR]
CF_P-MANETIME_%1[CR]
CF_ON-STA_%1[CR]
CF_STANDBYMODE_%1[CR]
CF_PTIMEMODE_%1[CR]
CF_PTIMER_%1[CR]
CF_PTIME_%1[CR]
CF_CCAPTIONDISP_%1[CR]
CF_CCAPTIONCOLOR_%1[CR]
CF_RCODE_%1[CR]
CF_KEYDIS_%1[CR]
CF_PJPINCODE_%1[CR]
CF_FANMODE_%1[CR]
CF_FANCONTROL_%1[CR]
CF_DELAYCTRL_%1[CR]
CF_FILTIMER_%1[CR]
CF_FILH_%1[CR]
CF_FDEFAULT_%1[CR]

5.8 Other Command Table

Execute command
CF_KEYEMU_%1[CR]
CF_MENU_%1[CR]
CF_POWER_%1[CR]
CF_FREEZE _%1[CR]
CF_VMUTE _%1[CR]
Select language for OSD
Move menu position.
Set up Auto input function
Set Auto PC in Auto Setup
Set Auto Keystone in Auto Setup
Execute Auto Setup
Set screen mode for the case of no signal
Set Display function
Set Logo function
Set Terminal function
Set Power management mode function
Set Power management time
Set Direct power on function
Set Standby Mode
Select P-timer mode
Execute P-timer
Set Countdown timer for P-timer
Set channel of Closed caption
Set color of Closed caption
Select Remote Control Reception Code
Disable RC/Projector keys
Input PIN code to release PJ Lock
Select Fan mode
Select Fan control mode
Set Video delay control
Set time when Filter warning OSD is displayed
Reset Filter used time
Set the value to Factory Default
Item
Behave the same as corresponding key of projector
top panel
Switch ON/OFF of each Menu.
Switch ON/OFF of Power.
Set Freeze function.
Set Blank function.
12
Item