Screen Control Command; Cf_Screen Command; Cf_Dzcent Command - Canon LV-7290 Command Specifications

LV-7290 / LV-7295 / LV-7390/ LV-8225 Expand Serial Command Functional Specifications

8.7 Screen Control Command

8.7.1

CF_SCREEN Command

Command "CF_SCREEN_%1"[CR]
Computer
%1
AV / PC
Common
Select Aspect mode (image size on screen).
When Input specified by %1 is inappropriate for selected Input, the projector
returns "101" [CR] and the command is not executed.
"DZOOM UP" and "DZOOM DN" start effecting from the first command.
Details
This command is available in normal Power ON status.
Note) When Input is computer and AV sorts signals (480i / 575i...etc) are entered,
the signal recognized as Video Input.
Acceptable
Response
Unacceptable
8.7.2

CF_DZCENT Command

Command "CF_DZCENT_%1"[CR]
%1 "CENT" ---- Cancel Digital Zoom (CENT: "CENTER")
Cancel Digital Zoom
When image is expanded or shrunk, reset its value.
Details
This command is available in normal Power ON status and when Input is
Computer.
Acceptable
Response
Unacceptable
"NORMAL" ---------------------- Select Normal mode
"FULL" --------------------------- Select Full screen mode
"WIDE" -------------------------- Select 16:9 mode
"ZOOM" -------------------------- Select Zoom mode
Input is "TRUE" -------------------------- Select True mode
"CUSTOM" ---------------------- Select Custom mode
"DZOOM_UP" ----------------- Expand image size with Digital Zoom
"DZOOM_DN" ----------------- Reduce image size with Digital Zoom
"UP" ----- The same operation as pressing Up key or Left key
"DN" ------The same operation as pressing Down key or Right key
"NORMAL" ---------------------- Select Normal mode
"FULL" --------------------------- Select Full screen mode
"WIDE" -------------------------- Select 16:9 mode
Input is
"ZOOM" -------------------------- Select Zoom mode
Video
"CUSTOM" ---------------------- Select Custom mode
"UP" ----- The same operation as pressing Up key or Left key
"DN" --The same operation as pressing Down key or Right key
"RST" --------------------------- Reset screen adjustment
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
30