Chapter 3 Safety; Intended Use; System Requirements - Pilz PNOZmulti PNOZ m EF 8DI4DO Operating Manual

3 Safety
3.1

Intended use

3- Bestimmung/Gertebeschreibung_multi_Zusatz_Modul_2 3100 Intended use 3- 3.1 Safety Safety 3 3 000 Intended use
Bestimmung/Gertebeschreibung_multi_System_2
3.1.1

System requirements

3- Systemvoraussetzungen - Verweis auf Produktänderungen System requirements
The expansion module may only be connected to a base unit from the
configurable control system PNOZmulti 2 (please refer to the document
"PNOZmulti System Expansion" for details of the base units that can be
connected)
The configurable control system PNOZmulti 2 is used for the safety-re-
lated interruption of safety circuits and is designed for use in:

E-STOP equipment

Safety circuits in accordance with VDE 0113 Part 1 and EN 60204-1
Please refer to the "Product Modifications" document in the "Version
overview" section for details of which versions of the base unit and
PNOZmulti Configurator can be used for this product.
3-1