GDC SR-1000 User Manual page 33

5. AUTOMATION
i)
ii)
b) If the selected
i)
ii)
3
Click on the Save
USER MANUAL FOR SR-1000 STANDALONE INTEGRATED MEDIA BLOCK™
If Primitive is selected as the
the drop-down as shown below:
If Switch Source is selected as the
from the drop-down as shown below:
Device is a IMBGPIO, the
If Coil is selected as the Action
from the Param option:
If Register or Level is selected as the
from the Param option. The number of pins selected (left section) will be the
number of pins shown as enabled (right section). The user may select multiple
pins (right section) based on the number of pins selected (left section).
button to add the new cue or click
Action type, select the desired
Action type, select the desired
Action type can be Coil, Register or Level.
type, only one pin can be selected at a time
Action type, multiple pins can be selected
Discard to remove.
- 32 -
Param value from
Param value
nd
April 22 , 2021