GDC SR-1000 User Manual page 111

8. AUDIO PROCESSING
Click the Save button and exit the Configure Signal Generator page.
▪
Switch the Signal Generator
▪
Switch the Signal Generator
Note: The Signal Generator
1
2
1 [Play on channels]
2 [Play in sequence]
USER MANUAL FOR SR-1000 STANDALONE INTEGRATED MEDIA BLOCK™
to the ON position to start playing the test signal.
to the OFF position to stop playing the test signal.
operation and playback cannot be done at the same time.
Figure 73: Configure Signal Generator (1)
Figure 74: Configure Signal Generator (2)
Select one or more channels to output the specified test signal
5.1/7.1 channels can be selected to output test signals one-by-
one in sequence
- 110 -
nd
April 22 , 2021