GDC SR-1000 User Manual page 28

5. AUTOMATION
1 [Quick Mode Label]
2 [Send Automation Cue]
3 [Projector Quick Setup]
USER MANUAL FOR SR-1000 STANDALONE INTEGRATED MEDIA BLOCK™
An automation label can be configured to be easily triggered here.
This label can be set in Automation
(Refer to Section 5.6)
Click the Execute button to execute the automation cue.
This section is used to manually execute a configured automation
label.
Select a label and click the Execute
automation label manually.
This section is used to execute automation commands and select
macros for a configured projector.
Select the projector primitive or macro to be executed and click the
Execute button to send a command to the selected projector.
- 27 -
→
Option tab.
button to execute the
April 22
nd
, 2021