Performing Maintenance Tasks - Nokia FastMile 2.1.04 Product Overview

Management using the Web UI
Procedure 35
Procedure 36

13.7 Performing maintenance tasks

80
4 Click Save.
5 STOP. This procedure is complete.
Configure USB parameters
The USB port is only for Nokia internal use.
Configure voice parameters
Use this procedure to set voice parameters for the Nokia FastMile 4G Gateway.
1 If you are not already logged in to the Nokia FastMile 4G Gateway, log in as described in
section 13.2.
2 Select Application > Voice Setting from the top-level menu along the left side of the Nokia
FastMile 4G Gateway window.
3 Configure the voice parameters.
4 Click Save.
5 STOP. This procedure is complete.
You can use the web-based UI of the Nokia FastMile 4G Gateway to do the following:
•
change the password (see Procedure 37)
•
configure an alias for a host (Device Management) (see Procedure 38)
•
do a backup or restore of the configuration file (see Procedure 39)
•
upgrade firmware (see Procedure 40)
•
reboot the Nokia FastMile 4G Gateway (see Procedure 41)
•
restore the Nokia FastMile 4G Gateway to factory default settings (see Procedure
42)
3TG-00743-ABEA-TCZZA
Nokia FastMile 4G Gateway Product Overview
Issue: 02