Safety Standards Compliance; Emc, Emi, And Esd Compliance; Figure 4 Sample Safety Label - Nokia FastMile 2.1.04 Product Overview

Nokia FastMile 4G Gateway Product Overview

4.2 Safety standards compliance

4.2.1
Issue: 02
Figure 4 Sample safety label
This section describes the Nokia FastMile 4G Gateway compliance with North
American safety standards.
Warning —
approved by the party responsible for compliance could void
the user's authority to operate the equipment.

EMC, EMI, and ESD compliance

The Nokia FastMile 4G Gateway equipment complies with the following EMC, EMI,
and ESD requirements:
•
Federal Communications Commission PART 15-RADIO FREQUENCY DEVICES
Subpart C-INTENTIONAL RADIATORS Title 47 CFR Part 15. Part 15.247, Part
15.255
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications
3TG-00743-ABEA-TCZZA
Changes or modifications to this unit not expressly
ANSI safety guidelines
31