Nokia FastMile 2.1.04 Product Overview page 69

Nokia FastMile 4G Gateway Product Overview
Procedure 15
Procedure 16
Issue: 02
Configure the white cell list
Use this procedure to configure the white cell list for the Nokia FastMile 4G Gateway.
1 If you are not already logged in to the Nokia FastMile 4G Gateway, log in as described in
section 13.2.
2 Select Network > White Cell from the top-level menu along the left side of the Nokia FastMile
4G Gateway window.
3 Configure white cell list values.
4 STOP. This procedure is complete.
View available cell information
Use this procedure to view available cell information for the Nokia FastMile 4G Gateway.
Caution — This procedure disconnects the Nokia FastMile 4G
Gateway from the WAN. The length of the scan will depend on the
wireless environment; it might take about 15 to 30 seconds per band. The
Nokia FastMile 4G Gateway automatically re-connects when the scan is
finished.
1 If you are not already logged in to the Nokia FastMile 4G Gateway, log in as described in
section 13.2.
2 Select Network > Available Cell from the top-level menu along the left side of the Nokia
FastMile 4G Gateway window.
3 Click Scan to start the scan. Note that this disconnects the Nokia FastMile 4G Gateway from
the WAN.
4 Click Refresh to display the available cell information.
5 STOP. This procedure is complete.
3TG-00743-ABEA-TCZZA
Management using the Web UI
69