TOOLS REQUIRED
• Safety Glasses
• Drill
• Drill Bit: 1/8 inch (3 mm)
• Pliers, Push Pin Rivet
IMPORTANT
Your Wireless Remote Kit is exclusively designed for your vehicle. Please read the installation instructions
thoroughly before beginning. Installation is easier if the vehicle is clean and free of debris. For your safety, and to
ensure a satisfactory installation, perform all installation steps correctly in the sequence shown.
ASSEMBLY TIME
Approximately 20–30 minutes
Additional time may be required for optional step, or to accommodate other accessories.
HARNESS DETAIL
WIRELESS RECEIVER
REF
PART DESCRIPTION
1A
Wireless Receiver
1B
Connector, Autostop Controller/
Contactor
1C
Connector, Wired Remote
q q
:
Instr 9929286
• Screwdriver Set, Torx
• Socket Set, Metric
• Wrench Set, Metric
NOTE
WIRE
PIN QTY/
COLOR
GENDER
-
-
-
4 male
-
4 female
Rev 01 2018-04
Page 2 of 5
®
CONNECTS TO
Vehicle structure
Main vehicle harness breakout;
see instructions for detail
Wired remote socket; see
instructions for detail