Advertisement
F
T
IRES OF
RADITION
NOTE– the installation requirements for the gas fireplace are very relative to
the front you are going to be using. Make sure that you read the proper section
of this manual thoroughly in order to insure that the fireplace is installed at the
correct height relative to the floor!
Page 5 Installing the Corvallis with the Fenderfire ftont, 4 pc slip kit & 534
Page 12 Installing the Corvallis with the Ventana & 3 pc slip kit
Page 20 Installing the Corvallis with the Clearview front, 3 pc slip kit & 534
Page 20 Installing the Corvallis with the Windsor front & 530
The fireplace manufacturer's technical specifications take precedence over any
thing detailed in the following. All clearances or installation requirements
detailed in the fireplace manufactures installation manual or the local building
code should be strictly followed.
The Jurastone mantel is designed to be hung on a set of steel brackets which are
securely attached to the stud wall (behind the drywall). These steel brackets
lock the mantel together and keep the mantel firmly attached to the wall.
Always install this mantel with the brackets!
Failure to do this could result in serious injury!
Fires of Tradition assumes no responsibility for the colour and texture
variations of Jurastone mantels. There will be slight variations in colour and
texture from time to time. Fires of Tradition assumes no responsibility for the
care and cleaning of Jurastone mantel.
I
I
NSTALL
NSTRUCTIONS FOR
Index
Page 3 & 4 Component identification
Page #21 Care and maintenance
P
AGE
J
URASTONE
2
21
OF
C
#4008
ORVALLIS
Advertisement
