Installation Steps - Emerson RXi Quick Start Manual

Installation Steps

1.
2.
Figure 10: Panel Install View
3.
Figure 11: Mounting Bracket Insertion
4.
5.
Figure 12: Tighten Mounting Bracket
21
Verify that the gasket is present and properly seated in the bezel channel located on the sides of
the unit.
Carefully insert the Panel PC into the mounting panel cutout.
Insert the hook of the mounting bracket into the mounting hole as displayed in the following
figure.
Tighten all mounting brackets by hand until the gasket seal contacts the mounting surface
uniformly.
In a cross pattern around the monitor tighten all mounting clip screws to a torque of 13 to 13.9 in-
lbs. (15 to 16kgf-cm) making sure not to overtighten the bracket.
RXi – Panel PC Quick Start Guide GFK-3072B