Initial Startup
Environmental Conditions
Environmental conditions as identified in Section 1.1 shall be followed during installation and operation.
Intended Use
The RXi Panel PC is intended for use in industrial environments only.
documentation is part of the intended use. Installation, commissioning, and maintenance shall be
carried out by qualified personnel.
I/O and Connectors
Outside I/O
The rear panel I/O port arrangement consists of the following:
1 power button
▪
1 24V DC-in 3-pin power connector
▪
1 DP++
▪
2 USB 3.0 ports
▪
2 RJ45 LAN ports
▪
1 UART terminal-block
▪
1 Line-out jack
▪
1 Mic-in jack
▪
Figure 7: Rear Panel Arrangement
14
RXi – Panel PC Quick Start Guide
Adherence to supplied
GFK-3072B