USB Ports
The USB ports allow for data exchange between your computer and a wide range of simultaneously
accessible external Plug and Play peripherals.
The RXi – Panel PC is equipped with 2 onboard USB 3.0 ports (USB 0-1) in the small configuration with an
additional 2 USB 2.0 ports (USB 4-5) in the large box configuration.
BIOS Setting
Configure the onboard USB in the Advanced menu ("Wakeup Configuration" submenu) of the BIOS.
Refer to chapter 3 for more information.
Wake-On-USB Keyboard/Mouse
The Wake-On-USB Keyboard/Mouse function allows you to use a USB keyboard or USB mouse to wake
up a system from the S3 (STR - Suspend To RAM) state.
Serial Ports (UART)
Audio
Rear Audio
The system board is equipped with 2 audio jacks (Line-out and Mic-in). A jack is a one-hole connecting
interface for inserting a plug.
•
This jack is used to connect a headphone or external speakers.
•
This jack is used to connect an external microphone.
BIOS Setting
Configure the onboard Audio device in the Chipset menu ("SB HD Azalia Configuration" submenu) of the
BIOS.
16
Serial
Connection
RS232
RS485
Line-out Jack (Lime)
Mic-in Jack (Pink)
RXi – Panel PC Quick Start Guide
Pin
Function
1
TXD
2
RXD
3
RTS
4
CTS
5
GND
6
TX+
7
TX-
8
RX+
9
RX-
10
GND
GFK-3072B