Table of Contents
Advertisement
Chapter 3
C. Mix of Single-Sided Originals
1) The 1st original is picked up, and its lead edge is butted against the registration roller to remove the skew.
(For details of pickup operation, see 'Original Pickup/Separation.')
Registration roller
2) The machine rotates the registration roller and the transport belt to move the 1st original.
Registration roller
3) The machine places the 1st original on the copyboard. The host machine starts to scan the original.
4) The machine uses the transport belt and the delivery roller to discharge the 1st original. The host machine
moves the scanner in reverse.
Transport belt
3-32
1st original
F-3-42
2nd original
Transport belt
F-3-43
F-3-44
F-3-45
Advertisement
Table of Contents
