Thermostat Installation; Manual Shut-Off Valve, Hose And Regulator Assembly - L.B. White AW250 Owner's Manual And Instructions

Agricultural animal confinement building heaters

Hide thumbs Also See for AW250:

Owner's manual and instructions (29 pages)

Installation and service manual (96 pages)

Assembly and installation instructions manual (24 pages)

Table Of Contents

Table of Contents

Electrical Shock Hazard

■

Disconnect the electrical supply before connecting the

thermostat to the heater.

■

Failure to follow this warning can result in electrical

shock, leading to personal injury or death.

To Connect the Direct Wired Thermostat Kit to the Control

Box on the Heater:

a. The installation and wiring of a thermostat must

be done by an electrician or someone properly

qualified.

1. Always use approved pipe thread compound suitable

for use with L.P. on the threaded connections.

2. Assemble the components together according to the

figure. This view is to show general assembly of the

components only. The regulator must always be

mounted so its vent, regardless of location on the

regulator, is always pointed downward.

3. Tighten all connections securely.

4. Check all connections for gas leaks using approved

gas leak detectors.

WARNING