Advertisement
Quick Links
Side Extension Panel 069-5796 and 000SEPKIT
Description
Kit 069-5796 includes a Side Extension Panel (SEP), two support arms, and the instructions to assemble and use a SEP with
a Ferno
101-H, 102, or 103 embalming table. The SEP is designed to provide additional width to an embalming table for
®
bariatric use and also serves as a splash guard.
Kit 000SEPKIT is for a Ferno
069-5797 (SEP storage kit for Ferno
install the SEP storage kit.
Parts Supplied (069-5796)
1 ea
Side Extension Panel (SEP) Assembly
2 ea
*
Note:
Kit 000SEPKIT contains two sets of the components listed above, plus two sets of the components of kit 069-5797. Please
refer to manual 234-3497 for instructions on how to install the SEP storage kit for a Ferno
© Ferno-Washington, Inc 234-3488-00 April 2012
Kit 069-5796 Side Extension Panel
101-H embalming table only, and includes two sets of kit 069-5796 as well as two sets of kit
®
101-H embalming tables). Please refer to manual 234-3497 for instructions on how to
®
*
Support Arm Assembly
Kit 069-5796 and 000SEPKIT
Side Extension Panel
for Ferno® Embalming Tables
101-H embalming table.
®
1
Advertisement
Related Manuals for Ferno Kit 069-5796
Summary of Contents for Ferno Kit 069-5796
- Page 1 Kit 069-5796 Side Extension Panel Description Kit 069-5796 includes a Side Extension Panel (SEP), two support arms, and the instructions to assemble and use a SEP with a Ferno 101-H, 102, or 103 embalming table. The SEP is designed to provide additional width to an embalming table for ®...
- Page 2 Side Extension Panel 069-5796 and 000SEPKIT Side Extension Panel (SEP) Assembly Metal Rubber Latch Lock Stopper Spring- Plunger Support Arm Assembly Loaded Pin Spring Key 069-5796 Kit Components Note: Kit 000SEPKIT contains two sets of the components listed above. © Ferno-Washington, Inc 234-3488-00 April 2012...
- Page 3 Verify that both rubber stoppers of each support arm assembly are firmly resting against the bottom of the embalming table. Figure 4 - Verify the Rubber Stopper is Firmly Resting Against the Bottom of the Embalming Table © Ferno-Washington, Inc 234-3488-00 April 2012...
- Page 4 11. Once adjusted, re-tighten the wingnut by turning it clockwise (Figure 7). Figure 7 - Re-Tighten the Wingnut 12. The attached SEP will look like the one in Figure 8. Figure 8 - SEP Attached to the Embalming Table © Ferno-Washington, Inc 234-3488-00 April 2012...
- Page 5 Loosen and remove the four threaded knobs on the SEP (Figure 10). Figure 10 - Remove the Knobs on the SEP Remove both brackets with tubes attached on the SEP (Figure 11). Figure 11 - Remove Brackets and Tubes From the SEP © Ferno-Washington, Inc 234-3488-00 April 2012...
- Page 6 SEP. Tighten one threaded knob into each of the holes of the tubes. Use steps 2-5 on page 3 to attach the support arm assemblies to the SEP. Figure 13 - Re-Attach the Knobs © Ferno-Washington, Inc 234-3488-00 April 2012...
- Page 7 Side Extension Panel 069-5796 and 000SEPKIT noteS © Ferno-Washington, Inc 234-3488-00 April 2012...
-
Page 8: Ferno Customer Relations
Fax (Toll-free) 1.888.388.1349 1.937.382.1191 Internet www.ferno.com All otheR locAtionS For assistance or information, please contact your Ferno distributor. If you do not have a Ferno distributor, please contact Ferno Customer Relations: Telephone +1.937.382.1451 +1.937.382.6569 Internet www.ferno.com Ferno-Washington, Inc. 70 Weil Way...