Unpacking Washer/Dryer - Whirlpool WFC8090GX Use And Care Manual And Installation Instructions

Unpacking Washer/Dryer

NOTE:
To avoid floor damage, set washer onto cardboard
before moving it.
1.
Move washer/dryer
48"
(1.2 m)
IMPORTANT: It is necessary to remove all shipping
materials for proper operation and to avoid excessive noise
from washer/dryer.
Move washer/dryer to within 48" (1.2 m) of its final location.
It must be in a fully upright position.
1.
Remove four transport bolts
from washer/dryer
Loosen the four transport bolts with a 3/8" (10 mm) wrench.
Once each bolt is loose, wiggle and completely pull them out
of the washer/dryer, along with all four shipping plugs.
Transport bolt
Shipping plug
IMPORTANT: It is necessary to remove transport bolts and
shipping plugs for proper operation and to avoid excessive
noise from washer/dryer.
73