Packaging For Transport - ABB FMT400-VTS Operating Instruction

11 Packaging for transport

If the original packaging material is no longer available, wrap the device in a padded plastic film or corru-
gated paper board and place it in a box of sufficient size lined with a shock-absorbing material (e. g. foam
rubber). The thickness of the shock-absorber should be in accordance with the device weight and the
type of shipment.
The box must be handled with care and has to be labeled accordingly.
For overseas shipment always add a desiccant (e.g. silica gel) and wrap the device and the desiccant
bag in apolyethylene foil of 0.2 mm. Adapt the amount of desiccant to the packing volume and the ex-
pected transport time (at least sufficient for 3 months). Additionally line the box with a layer of union paper.
42/14-36 EN Thermal Mass Flowmeter FMT400-VTS, FMT400-VTCS (Sensyflow VT-S/VT-CS)
Packaging for transport
33