you can put the printer into high speed (110 cps), lower quality mode.
Selecting
1
High
Make sure the printer is online.
Speed
Press the LF/FF and FWD ADJ switches simultaneously to light the HIGH
2
SPEED indicator.
Selecting High
Quality
Selecting Printer Emulation
The BJ-20 allows you to emulate three types of printers: the Epson LQ-
510, the IBM Proprinter X24E, and the Canon BJ-l 30e printers. They
are further grouped under two modes: the LQ mode and the BJ-lOe
mode, as shown in the table below.
1
Make sure the printer is online.
Press the LF/FF and FWD ADJ switches simultaneously until the
2
HIGH SPEED indicator goes off.
Note
When the printer is running at high speed less ink is used,
thus extending the BJ cartridge life.