Canon BJ-20 User Manual page 27

HQ elite*
HQ pica
HQ double-high
Draft elite
Draft pica
HQ double-wide
Draft condensed
Draft condensed subscript
HQ emphasized elite*
HQ emphasized pica
When MODE 1 is selected (DIP SW 11 is off
and 12 is off, IBM X24E emulation), the
prestige font is used.
When shipped, the printer is set to the BJ-10e mode (page
63). If you later change it to the LQ mode, the test page in
the Ripple Pattern test will be printed in HQ prestige
instead (See the Ripple Pattern test sample below). The
All Modes Test, however, is not available in the LQ mode.
Ripple Pattern Test in LQ mode