Olympia Omega D 250 Operation Manual page 72

CHAPTER 7 WHEN A PROBLEM OCCURS
Metric specifications
1
Remove the misfed paper in the built-in finisher output
section.
Lower the built-in finisher tray.
2
Remove the misfed paper.
3
Raise the built-in finisher tray back into its original posi-
4
tion.
7-10
5 Remove the tray.
1
6
Pull up the lock lever to open the left cover 1.
7
Remove the misfed paper.
Install the tray.
8
9 Close the left cover 1.
5 5 5 5 5 Misfed in document finisher (optional) (JAM 80 to 89)
If a misfeed has occurred in the document finisher, remove the
misfed paper referring to the operation guide for the document
finisher.
3
2