Olympia Omega D 250 Operation Manual page 69

2
Remove the misfed paper.
3 Close the left cover 2.
•
Misfeed in multi-bypass (JAM14, 20, 21, 23)
If the message below appears, a misfeed has occurred in the
multi-bypass.
Remove the misfed paper using the procedure given below.
Inch specifications
Metric specifications
Remove all the paper remaining in the multi-bypass.
1
2
Pull up the lever to remove the misfed paper.
* If the misfed paper cannot be removed, go to the next
step.
CHAPTER 7 WHEN A PROBLEM OCCURS
3 Pull up the lock lever to open the left cover 1.
Remove the misfed paper.
4
When the duplex unit is installed, raise the duplex unit to
5
remove the misfed paper.
If the misfed paper cannot be removed, go to the next
step.
Open the front cover.
6
7-7