Olympia Omega D 250 Operation Manual page 44

CHAPTER 6 COPIER MANAGEMENT
•
Select copy output mode (optional)
Select whether to eject copied paper to copier or either the docu-
ment finisher or job separator.
1
Display the "Machine default" screen. (See (2) Access-
ing the machine default setting mode.)
Inch specifications
Metric specifications
Select "Select Copy output mode" in the setting item list
2
at the left-hand side of the screen, and then touch the
[Change #] key.
The "Select copy output mode" screen will appear.
Inch specifications
Metric specifications
3
Select which to eject copied paper: the inner tray, job
separator, document finisher main tray or document fin-
isher sub tray.
NOTE
• To cancel the settings, touch [Back] key. The display will return
to the "Machine default" screen.
4 Touch the [Close] key.
The display will return to the "Machine default" screen.
5 Touch the [Close] key.
The display will return to the "Default setting menu"
screen.
6-8
•
Select FAX output mode (optional)
Select where to eject facsimile paper: the inner tray, job separa-
tor, document finisher or mailbox.
1
Display the "Machine default" screen. (See (2) Access-
ing the machine default setting mode.)
Inch specifications
Metric specifications
Select "Select FAX output mode" in the setting item list
2
at the left-hand side of the screen, and then touch the
[Change #] key.
The "Select FAX output mode" screen will appear.
Inch specifications
Metric specifications
3
Select where to eject facsimile paper: the inner tray, job
separator, document finisher or mailbox.
NOTE
• To cancel the settings, touch [Back] key. The display will return
to the "Machine default" screen.
4
Touch the [Close] key.
The display will return to the "Machine default" screen.
5
Touch the [Close] key.
The display will return to the "Default setting menu"
screen.