Table of Contents
Advertisement
CHAPTER 6 COPIER MANAGEMENT
"Machine default"
settings
Check bypass sizing
When copying with the multi-bypass, select
whether or not you want to confirm the paper
size key of the basic screen in regard to those
cassettes that contain such special paper or re-
cycled paper.
Auto shut-off time
Selects the length of time that you want to elapse
when the copier is not used. The auto shut-off
function automatically turns the power to the
copier OFF. It is possible to set this time to any
15 minute increment between 15 and 240 min-
utes. It is also possible to deactivate the auto
shut-off function.
The factory default setting is 60 minutes.
*It is recommended that you extend the time
before the auto shut-off function engages if the
copier is used relatively frequently, and shorten
that time when it is used infrequently.
Auto preheat time
Select the length of time that you want to elapse
– after copying ends – before the energy-sav-
ing auto preheat function is engaged. It is pos-
sible to set this time to any 5 minute increment
between 1 and 45 minutes.
Select copy output
Selects whether to eject copied paper to copier
mode (optional)
or either the document finisher or job separator.
*This setting is not displayed when the copier is
not equipped with the optional document finisher
or job separator.
Select FAX output mode
Selects where to eject facsimile paper: the in-
(optional)
ner tray, job separator, document finisher or mail-
box.
*This setting is not displayed when the copier is
not equipped with the optional document finisher
or job separator.
Select the main mode
Selects the initial screen displayed when the
(optional)
power is turned ON.
Key sound ON/OFF
Selects whether you want the "beep" that sounds
when you touch the touch panel to be turned
ON or OFF.
Silent mode
The copier can be switched to the silent mode,
which stops the motor inside the copy machine
immediately after copying has been finished.
When "ON" is selected, the motor stops imme-
diately after copying has been finished.
Date/Time
Sets the current time for using the optional scan-
ner function.
Time difference
Sets the time difference for using the optional
scanner function.
Management
code
Changes the pin code that gives you access to
change
the various default settings and management.
*If you do change the management pin code,
however, be sure to keep a note of the new code.
If you do happen to forget the pin code, consult
your service representation.
Auto shut-off ON/OFF
Selects whether you want the auto shut-off time
function to be turned ON or OFF.
6-2
Content of machine default settings
Setting range
Default settings
ON/OFF
15 to 240 (min)
1 to 45 (min)
Inner tray, Job sepa-
rator, Finisher main
tray, Finisher sub
tray
Inner tray, Job sepa-
rator, Finisher sub
tray, Mailbox 1
Copy mode, FAX
Copy mode
mode
ON/OFF
ON/OFF
Year: 2000 to 2099
Year: '00
Month: 1 to 12
Month: 01
Day: 1 to 31
Day: 01
Time: 00:00 to
Time: 00:00
23:59
+12:00 to –12:00
00:00
0000 to 9999
2500 (For Copiers
with a copy speed of
25 copies per minute)
3500 (For Copiers
with a copy speed of
35 copies per minute)
4000 (For Copiers
with a copy speed of
40 copies per minute)
ON/OFF
Page
ON
6-6
60 (min)
6-7
15 (min)
6-7
Inner tray
6-8
Inner tray
6-8
6-9
ON
6-9
OFF
6-10
6-10
6-11
6-11
ON
6-12
Advertisement
Table of Contents
