CHAPTER 6 COPIER MANAGEMENT
•
Paper type (1st cassette)
Select the type (standard or special) of paper to be loaded in the
1st cassette.
1
Display the "Machine default" screen. (See (2) Access-
ing the machine default setting mode.)
Inch specifications
Metric specifications
2
Select "Paper type (1st cassette)" in the setting item list
at the left-hand side of the screen, and then touch the
[Change #] key.
The "Paper type (1st cassette)" screen will appear.
Inch specifications
Metric specifications
3
Select the paper type as 1st cassette to be displayed on
the touch panel, and then touch the [On] key.
NOTE
• To cancel the settings, touch [Back] key. The display will return
to the "Machine default" screen.
4
Touch the [Close] key.
The display will return to the "Machine default" screen.
5
Touch the [Close] key.
The display will return to the "Default setting menu"
screen.
•
Paper type (2nd cassette)
Select the type (standard or special) of paper to be loaded in the
2nd cassette. (See "Paper type (1st cassette)".)
6-6
•
Check bypass sizing
When copying with the multi-bypass, select whether or not you
want to confirm the paper size key of the basic screen in regard
to those cassettes that contain such special paper or recycled
paper.
1
Display the "Machine default" screen. (See (2) Access-
ing the machine default setting mode.)
Inch specifications
Metric specifications
2
Select "Check bypass size" in the setting item list at the
left-hand side of the screen, and then touch the [Change
#] key.
The "Check bypass size" screen will appear.
Inch specifications
Metric specifications
3
Touch the [On] key when using custom size or changing
paper type.
NOTE
• To cancel the settings, touch [Back] key. The display will return
to the "Machine default" screen.
4
Touch the [Close] key.
The display will return to the "Machine default" screen.
5
Touch the [Close] key.
The display will return to the "Default setting menu"
screen.