Using A Usb Cable - Brother 882-W01 Operation Manual

PRINT AND STITCH (COMBINING EMBROIDERY PATTERNS AND PRINTED DESIGNS)
o Two files of the background image only and one file
for aligning embroidery into position are copied
(PDF format) onto the USB media.
Memo
• Do not remove the USB media from the
machine until data output is finished.
d
Remove the USB media where the image
data is saved from the machine, and then
copy the image data from the USB media to
the computer.

■ Using a USB Cable

a
Plug the USB cable connectors into the
corresponding USB ports on the computer
and on the machine.
a USB port for computer
b USB cable connector
o The "Removable Disk" icon appears in "Computer
(My computer)" on the computer.
b
Select the pattern, and then press
o The select USB output screen appears.
c
Press .
o Two files of the background image and one file for
aligning embroidery into position are copied (PDF
format) into "Removable Disk" under "Computer
(My computer)".
Memo
• Do not disconnect the USB cable from the
machine until data output is finished.
d
Copy the image data saved in "Removable
Disk" into a different file before closing.
.
6
309