Heirloom; Hemstitching (1) (Daisy Stitch); Hemstitching (2) (Drawn Work (1)) - Brother 882-W01 Operation Manual

Heirloom

■ Hemstitching (1) (Daisy Stitch)

Use for sewing tablecloths, decorative hems, and
decorative stitching on shirt fronts.
Memo
• Use a light to medium weight homespun fab-
ric with a little stiffness.
a
Insert a type 130/705H, size 100/16 Wing
needle.
* This specialty sewing needle is not furnished with
your machine. Must be purchased separately.
CAUTION
• The "Automatic Threading" button cannot be
used. Thread the wing needle by hand, from
front to back. Using the "Automatic
Threading" button may result in damage to the
machine.
• A more attractive finish can be obtained if you
use a "130/705H Wing" needle when sewing
these patterns. If using a wing needle and the
stitch width has been set manually, check that
the needle will not touch the presser foot by
carefully rotating the handwheel toward you
(counterclockwise) before starting to sew.
b
Select a stitch and attach presser foot "N".
* Select any stitch between 3-01 and 3-25.
Memo
• For details on each stitch, refer to the
"STITCH SETTING CHART" at the end of
this manual.
c
Start sewing.
Example: Illustration of finished product

■ Hemstitching (2) (Drawn Work (1))

a
Pull out several threads from one area on a
piece of fabric to open the area.
* Pull out 5 or 6 threads to leave a 3 mm
(approx. 1/8 inch) area open.
Memo
• Loosely woven fabrics work best for this.
b
Select .
Memo
• For details on each stitch, refer to the
"STITCH SETTING CHART" at the end of
this manual.
c
Attach presser foot "N". With the right side
of the fabric facing up, sew one edge of the
open area.
SEWING THE STITCHES
3
119