Lower Threading; Winding The Bobbin; Using The Supplemental Spool Pin - Brother 882-W01 Operation Manual

LOWER THREADING

Winding the Bobbin

o
Press
o
in this order to display a
video example of bobbin winding on the LCD (see
page 34). Follow the steps explained below to
complete the operation.
CAUTION
• The included bobbin was designed specifically
for this sewing machine. If bobbins from other
models are used, the machine will not operate
correctly. Use only the included bobbin or
bobbins of the same type (part code: SA156,
(SFB: XA5539-151)).
* Actual size
a This model
b Other models
c 11.5 mm (approx. 7/16 inch)
o o

■ Using the Supplemental Spool Pin

With this machine, you can wind the bobbin during
sewing. While using the main spool pin to sew
embroidery, you can conveniently wind the bobbin
using the supplemental spool pin.
a Supplemental spool pin
a
Turn the main power to ON and open the
top cover.
b
Align the groove in the bobbin with the
spring on the bobbin winder shaft, and set
the bobbin on the shaft.
a Groove in the bobbin
b Spring on the shaft

LOWER THREADING

37
1