Attaching 4 Hole Buttons; Attaching A Shank To The Button - Brother 882-W01 Operation Manual

SEWING THE STITCHES

■ Attaching 4 Hole Buttons

Sew the two holes closest to you. Then raise the
presser foot and move the fabric so that the needle
goes into the next two holes, and sew them in the
same way.

■ Attaching a Shank to the Button

a
Pull the shank lever toward you before
sewing.
a Shank lever
b
Pull the two ends of the upper thread
between the button and the fabric, wind
them around the shank, and then tie them
firmly together.
c
Tie the ends of the bobbin thread from the
beginning and end of sewing together on
the wrong side of the fabric.
Note
• When sewing is completed, be sure to select
the other stitch and rotate the handwheel
toward you (counterclockwise) to raise the
feed dogs.
d
Cut off any excess thread.
132