Echo Quilting Using The Free Motion Echo Quilting Foot "E - Brother 882-W01 Operation Manual

Computerized embroidery and sewing machine
Table of Contents

Advertisement

SEWING THE STITCHES
b
Select a stitch.
Memo
• When stitch Q-01 or 1-31 is selected, free
motion quilting foot "C" is indicated in the
upper-left corner of the screen. When the
other stitches are selected, free motion open
toe quilting foot "O" is indicated in the
screen.
c
Remove the presser foot holder (see page
55).
d
Attach free motion open toe quilting foot
"O" by positioning the pin of the quilting
foot above the needle clamp screw and
aligning the lower-left of the quilting foot
and the presser bar.
a Pin
b Needle clamp screw
c Presser bar
Note
• Make sure that the quilting foot is not
slanted.
e
Hold the quilting foot in place with your
right hand, and tighten the presser foot
holder screw using the screwdriver with
your left hand.
a Presser foot holder screw
• Be sure to securely tighten the screws with the
included screwdriver. Otherwise, the needle
may touch the quilting foot, causing it to bend
or break.
108
CAUTION
f
Use both hands to stretch the fabric taut,
and then move the fabric at a consistent
pace in order to sew uniform stitches
roughly 2.0-2.5 mm (approx. 1/16 - 3/32
inch) in length.
a Stitch
g
Press
to cancel the free motion sewing
mode.
→ Rotate the handwheel toward you
(counterclockwise) to raise the feed dogs.
Memo
• Do not be discouraged with your initial
results. The technique requires practice.
■ Echo Quilting Using the Free Motion
Echo Quilting Foot "E"
Sewing quilting lines at equal distances around a
motif is called echo quilting. The quilting lines,
which appear as ripples echoing away from the
motif, are the distinguishing characteristic of this
quilting style. Use the free motion echo quilting foot
"E" for echo quilting. Using the measurement on the
presser foot as a guide, sew around the motif at a
fixed interval. We recommend attaching the foot
controller and sewing at a consistent speed.
Free motion echo quilting foot "E" measurement
a 6.4 mm (approx. 1/4 inch)
b 9.5 mm (approx. 3/8 inch)

Advertisement

Table of Contents
loading

This manual is also suitable for:

882-w02

Table of Contents